Penerapan Acceptable Quality Level (AQL) Dalam Tahapan Final Inspection Produk Garmen Di PT XYZ

Eki Wulandari Al Masruroh; Endang Pudji Widjajati

doi:10.61132/bima.v2i1.577

Authors

Eki Wulandari Al Masruroh UPN Veteran Jawa Timur
Endang Pudji Widjajati UPN Veteran Jawa Timur

DOI:

https://doi.org/10.61132/bima.v2i1.577

Keywords:

Acceptable Quality Level, Defects, Garments, Quality Control, Samples

Abstract

Quality control in the garment industry plays an important role to ensure that the products produced meet high quality standards and satisfy consumers. The Acceptable Quality Level method is a promising approach for optimizing garment product control. This research focuses on the application of the Acceptable Quality Level method in managing garment quality at PT XYZ. The aim is to explore the extent to which this method can be applied efficiently in garment production by considering the existing challenges and opportunities. This study uses the "L Tunic Crinckle" tunic sample from PT XYZ as the research object. Data collection involves primary data from direct interactions and observations, as well as secondary data from related literature and journals. Raw material sampling methods are based on product defects, focusing on attribute data to assess non-compliance with specifications. With an AQL value of 2.5% and general supervision level II, this study took a sample of 125 tunics for inspection. Even though several minor and major defects were found, the total rejects did not exceed acceptance standards, so the tunic product lot could be accepted without re-inspection

References

D. C. Montgomery, Introduction to Statistical Quality Control, 7th ed. New Jersey: John Wiley & Sons, Inc., 2013.

Debrina, dan L. Tri W. 2018. Teknik dan Manajemen Kualitas. Engineering Journal, Vol. 2, hh. 14-17

E. G. Schilling and D. V. Neubauer, Acceptance Sampling in Quality Control, 3rd ed. London: Chapman and Hall/CRC, 2017

G. Shmueli, Practical Acceptance Sampling, 2nd ed. Florida: Axelrod Schnall Publisher, 2016

Isnanto, Asih, dan Susetyo. 2019. Usulan Penerapan Metode Acceptable Sampling MIL STD 105E dan Penentuan Proses Capability. Jurnal Rekayasa dan Inovasi Teknik Industri, Vol 7, No 1, hal 25-32

Imansa, Pratiwi, dan, Suryani. 2020. Analisis Penerapan Jumlah Sampling Powder Dalam Pengendalian Kualitas Dengan Metode MIL-STD 105D (Studi kasus di PT Sriwijaya Alam Segar). Jurnal IKRA-ITH Teknologi, Vol 4, No 3, hal 65-74

Kaviyarasu, V., & Sivakumar, P. (2019). Implication of Production and Monitoring Techniques in Bayesian Single Sampling Plan using Gamma-Zero Inflated Poisson Distribution. International Journal of Recent Technology and Engineering, 8(4), 10110–10119. https://doi.org/10.35940/ijrte.C5136 .118419

Resita, M. 2013. Manajemen Mutu Terpadu. (Resita) https://reyzie.wordpress.com /2013/10/26/manajemen- mutu-terpadu.

Rizal, R. 2012. Monitoring, Pengendalian dan Penjaminan Mutu Produk Industri Garmen. LPPM UPN Veteran Jakarta

Salwa dan Mashuri. 2020. Evaluasi Rancangan Sampling pada Tahap Incoming Quality Control di PT. Genta Semar Mandiri. Jurnal Sains dan Seni ITS, Vol 9, No 2.

Subhan dan Pratama. 2020. Pengendalian Mutu dengan Metode Acceptable Sampling pada Boneka Jenis Bocchetta di PT Sunindo Adipersada. Prosiding IENACO, hal 372-378